Talking about the main points of the design consideration of the furniture material structure of the hotel
Generally speaking, the functional requirements of hotel room furniture are basically similar to the furniture composition. Relatively speaking, they are generally composed of the following furniture: hotel bed, dressing table, bedside table, luggage cabinet, TV cabinet, lounge chair, coffee table, sofa, etc. constitute. The wardrobe is generally completed by the decoration company on-site construction. The following 6 points should be considered in the design of hotel furniture material structure.
1. Structural strength
Guest room furniture is mostly fixed furniture, and the general structure is mainly plate type. Wood screws, hardware connectors and adhesives are used as joining methods. When using materials, you should pay attention to different material characteristics, such as particleboard and medium-density board, which have poor nail-holding power. Avoid using it in areas that require frequent activities or strong nail-holding power, such as door hinge screws, and bottom rails. The screw part is easy to loosen and produce sound. Particular attention should be paid to the hardware pendants on the bed screen and mirror frame wall, or wood should be used instead of reinforcement. At present, the 45-degree upside down structure of wood is popular.
2. Appearance quality
Appearance quality first requires the furniture countertop to be flat, fine workmanship, delicate decoration, clear and beautiful texture. Guest room furniture usually uses particleboard, medium-density fiberboard, blockboard, laminate and other substrates, and veneer, wood veneer, and plywood as cladding materials. Different base materials and cladding materials have different material characteristics. Failure to pay attention to the characteristics of the material and the correct use method often leads to warpage of the board. Experts suggest that the structural characteristics of the cladding materials on the back and the front of the panel must be the same or similar. The moisture content of the substrate is generally required to be 6-10%, and the materials selected should be the same batch as possible. In the workshop processing, try to shorten the time of loading and pressing, different material characteristics, different moisture content of cladding materials, pay attention to different coating thickness, pressing time and pressure.
3. Material cost
Try to use low-cost materials while meeting the requirements of use, pay attention to the use of the same kind of small materials while using large surface materials, and comprehensively improve the utilization rate of the board. Guest room furniture is generally large in quantity, try to use computers to arrange materials reasonably, and comprehensively use large and small materials to reduce material costs. For different structures, pay attention to the comparison of material costs.
Fourth, efficient production
In the case of the same material cost, the material is easy to process, and the process can save process costs and improve efficiency. Especially in the end milling, engraving, and engraving processes, the material is easy to process and cut, and is easy to be smooth and clean.
Five, safety performance
Generally, hotels do not have clear regulations on the amount of free formaldehyde, but there are furniture fireproof requirements. Fireproof boards, anti-scalding paints, flame-retardant fabrics, etc. can be used in certain parts of the hotel if allowed by the hotel. High-end hotels even require the wood used for furniture to be fireproofed.
The above factors need to be comprehensively considered and used in actual applications. The functional requirements of hotel furniture and the modeling details have an interactive relationship with the hotel furniture company’s reasonable material structure and workshop process arrangements. It is recommended that the produced guest room furniture meet the hotel requirements as much as possible. It can also produce efficiently, reduce costs, and use specialized processing technology and processing equipment to make the furniture produced meet the human-oriented comfort requirements of high-end hotels.
Six, transportation and installation
An insider in the hotel furniture industry said that the hotel floors are generally high, and the furniture is required to be light in weight and easy to transport. In particular, some conjoined bed backs and some extended desks cannot be transported by elevators. Freight elevators are generally removed when furniture is installed. How to transport them safely requires special consideration in terms of material weight and structure.
