1. About placement
The ground on which the panel furniture is placed must be kept flat and the four legs are balanced on the ground.If the furniture is in a state of constant wobbling and unsteadiness after placement,day after day, the tenons or fasteners will fall off and the bonding part will crack, thus affecting the use effect and reducing the life of the furniture.
2. About cleaning
When cleaning the furniture, it should be dusted first with a feather duster and other flexible tools, and then gently wipe with a damp towel or soft cloth to avoid scratching the furniture surface.
Furniture metal trim has dirt, first wipe it gently with a dry towel, do not use cleaners that contain chemicals, especially acidic liquid cleaners, it will wear out the surface of the furniture.
If there are special stains such as ink, mud, tape marks, etc. on the surface of the furniture, it is best to go to the store and buy a professional furniture cleaner to clean it.
Wardrobe light rail door under the rail is most likely to have dirt.When cleaning, you can first use a vacuum cleaner to vacuum out the dust and debris in the rails, then wipe with a damp towel that is wrung out.The dust strips on the side of the light rail door can be cleaned with a clean cloth dipped in dry cleaning agent if they have become dirty over time.
3. Panel furniture needs to avoid dragging as much as possible: when small pieces of furniture need to be moved, they must be lifted at the four corners simultaneously to avoid dragging on the ground, so as not to affect the service life of the furniture.Large furniture is best to ask professional companies for help.
4. Avoid hitting hard objects or sharp objects with furniture, and avoid hitting the surface of glass or metal ornaments. Avoid contact with corrosive liquids such as acids and alkalis.
5.Take six months as a cycle, regularly check the furniture joints, find loose parts should be reinforced in time,avoid accidents in which furniture parts fall off due to loose joints.
6. Restoration of furniture
Board furniture edges, such as the appearance of warping and leaving the layer, can be covered with a thin cloth, ironed with an iron can be restored to its original appearance.
7. Panel furniture is more susceptible to moisture,to keep the indoor ventilation and dry, so as to avoid deformation of the furniture by moisture, should avoid putting the furniture in the sun.
8. Drawers, doors and other parts should be opened and closed lightly, to avoid too much force, collision and damage.
Finally, the maintenance of panel furniture needs to be persistent.
