After the wooden door customized by the hotel furniture manufacturer is sent to the construction site, the next step is to install it. The quality of the installation directly affects the normal use at the back, so how to install it, please see the following content:
1. Mark the construction auxiliary line on the wall, use 3mm, 5mm and i2mm or 18mm large core board as the base respectively (according to the thickness of the wall), simulate the combination of all parts of the door frame, and adjust it until all parts match perfectly.Put the door cover frame line into the hole in the wall. The door frame edge and the top of the door frame are connected at 45 degrees. Make sure the two sides of the door frame are parallel and perpendicular to the top of the door frame.
2, after the installation of the door frame in the wall, the convex and concave between the door frame grinding, fill the gap, the interface should be coated with glue, in the lead hole on the 80mm wood tooth screw (the lead hole behind the interface), with a screwdriver to tighten.Pay attention not to screw directly into the door cover, carefully check whether the size between the mining is correct, whether the joint is flat and firm, then on the wall with mortar, paste brick.3. Determine the hinge installation position of the door frame, and reserve appropriate gaps after marking the corresponding position on the door.Process 2 ~ 3 bozhou meter slot on the door and fasten the hinge with the equipped screw.Temporarily fix the door in the corresponding installation position and adjust it to the correct position;Mark the fixed position of the hinge on the door frame and process the hinge slot to connect the door and fix the hinge.
4. Install the keyhole plate box and keyhole plate of the door frame. Generally, the height of the lock is 900-1000mm from the ground.
