1, plate processing, before the paint must be clean plate, large area use a vacuum cleaner repeatedly vacuuming, pay attention to the protection of wood skin;
2. The plate sealing agent is brushed and coated evenly on the plate, which can effectively prevent the plate from being contaminated, enhance the adsorption force between the film and the plate, and achieve the effect of saving the paint;
3, the scraping and painting of putty, the use of putty fill wood has uneven place, here to pay attention to the open and closed paint putty requirements are different, open paint putty color to be adjusted to the same as the plate;
4, start on the primer, the primer ratio will be adjusted, uniform spraying, primer can be very good to fill the wood hole, increase the thickness of the paint film, after the primer dry should be polished evenly, again for a spray, to do no flow, wood eye filling level;
5, sanding treatment, with sandpaper polishing, sanding treatment can make the plate more uniform, smooth, conducive to paint;
6, finish paint spraying, before the finish paint spraying must be clean again, in the spraying should not be a painting too thick, can dry and then spray, keep uniform, no flow, good gloss, feel delicate.
