Furniture and our life inseparable, and occupy an extremely important position, for our life to provide countless convenience, but furniture in the process of use is very easy to be damaged by the outside world, especially from hard or sharp objects scratch damage, if accidentally damaged wooden furniture how to repair?In use, there will always be varying degrees of damage, this is a normal phenomenon, but to find a good repair method.Some simple repair techniques have been described in the previous article on how to remove paint, crack and drum from furniture for easy repair.
1. Removing paint for furniture maintenance
(1) The furniture surface paint fell off, which is relatively simple maintenance, you can use the same color and furniture crayon daub on it, or repair with the original paint color of the furniture factory.
(2) Then wait for a period of time, let it dry and firm, then use colorless armor oil on a layer, as a protective film, to avoid causing further damage.
2. The surface of the furniture is bulging
(1) Furniture surface drum is a very common phenomenon. First, cut a knife in the middle of the bubble along the direction of wood grain with a sharp blade, then inject glue into the seam with a syringe, gently press the upper part of the bubble with your finger, and wipe off the overflow with a wet cloth.
(2) Then use a heavy weight with a smooth bottom and larger than the bubble area to press on it. In order to prevent a small amount of glue from spilling and sticking to the surrounding surface of the bubble after pressurization, cover the bubble with plastic film to separate it, which can make the position of the bubble become flat.
3. Furniture cracked
(1) For the table, chair, cabinet surface cracks, knock against, fracture and other problems, the repair method is very simple, with 502 glue mix wood chips, the damaged place while filling and polishing.
(2) Be sure to maintain a level with the surrounding, and then the surface of the color, color, polishing, until the finish repaired complete.
(3) This process seems simple, but contains a more professional technology, must ask professional furniture maintenance master to come to deal with, do not toss and turn.
4, furniture surface scratches
(1) If the furniture was accidentally scratched, but did not touch the wood below the paint film, soft cloth with a little melted wax (color and furniture color), coated in the paint film wound, covering the scar.Wait for wax to become hard, and then apply again, so repeatedly apply more than a few times, the film scar can be covered.
(2) Colorless nail polish or paint of the same color can also be used to fill, seal the small gap, so that it and the overall horizontal position.
5, furniture hot mark processing
With a piece of dry, ultrafine furniture besmear special steel velvet pad in hot mark directly along the direction of the grain wipe, also can use salad oil or mayonnaise besmear in hot mark, take soft cloth along the grain gently wipe, and then change a clean soft cloth to wipe it clean, finally polish.Cigarette butts or unextinguished matches leave scorch marks on the paint surface of furniture. If the paint surface is burned, cover the matchstick or toothpick with a hard cloth with fine grain, gently wipe the marks, and then apply a thin layer of wax to fade the scorch marks.
