The hotel furniture we are familiar with generally includes: standard room furniture, suite furniture, presidential suite furniture. Generally speaking, no matter what standard suite furniture is, its functional requirements and furniture composition are basically similar, not only requiring sleep and rest, but also the function of writing but also the storage of small pieces of luggage. Corresponding furniture generally includes: bed sets, writing desks, luggage cabinets, TV cabinets, lounge chairs, coffee tables, bedside tables, etc. When choosing hotel room furniture, you can start from the following aspects:
1. Is the material reasonable?
Different hotel furniture has different surface materials. For example, the legs of tables, chairs, and cabinets are made of hard materials that are relatively strong and load-bearing, while other materials can be used for the internal materials; the thickness of the legs of the wardrobe can be as long as 2.5 cm. If they are too thick, they are clumsy and too thin. It is easy to bend and deform; kitchen and bathroom cabinets cannot choose fiberboard material, because fiberboard will swell and be damaged when exposed to water, so you should choose three-plywood material; for dining table, you should choose water-resistant materials.
2. Whether the moisture content of wood exceeds the standard
The moisture content of hotel furniture should not exceed 12%. If the moisture content is high, the wood is easy to warp and deform. Generally, consumers do not have a test instrument when buying, so they can take the method of hand touch, touch the bottom of the furniture or the unpainted place inside, if it feels damp, then the moisture content is at least 50% and cannot be used at all. Another way is to sprinkle a little water on the unpainted area of the furniture wood. If there is no water immersion or the immersion is slow, it means that the moisture content is higher.
3. Is the structure firm?
Small pieces of furniture, such as chairs, stools, hangers, etc., can be dragged on the concrete floor when selecting, and dropped gently. If the sound is crisp, the quality is better; if the sound is dumb, there is a murmur , Which shows that the mortise joint is not tight and the structure is not strong. Writing desks and tables can be shaken by hand to see if they are stable. You can sit on the sofa for a while. If you sit on the sofa, it will squeak and creak with a slight movement. If it shakes, it means that the nails will not take long. There should be four triangular clips on the legs of the square table, the bar table, the chair, etc., which can be used for fixing. When choosing the table and chair, you can turn the table and chair upside down and have a look. The cloth-covered chair can be touched with your hand.
4. Are the four legs of the furniture flat?
I will know this when I put it on the flat ground. Check if the table top is straight. You don’t need to bow your back or collapse your waist. You can use a piece of glass to test. If the table top is raised, the glass plate will spin when you put it on; if the table top is recessed, just press the glass plate. broken. The cabinet doors and drawers should not be too large, and should be flat and straight, and the door should not sag.
5. Lax joints of veneer furniture
Whether it is pasting wood veneer, PVC or pasting pre-painted paper, pay attention to whether the leather is smoothly pasted, whether there are bulges, blisters, and loose seams. Look at it when checking, otherwise you won't be able to see it. Fraxinus mandshurica veneer furniture is relatively easy to damage, and generally only lasts two years. As far as wood veneers are concerned, planed veneers are better than peeled veneers. The method to identify the two is to look at the wood pattern. The sliced veneer has a straight and dense texture, and the peeled veneer has a curved and sparse pattern. For furniture with particleboard veneer, the ground part must be sealed. If the edge is not sealed, the board will absorb moisture, swell and be damaged. Generally, the corners of veneer furniture are easy to tilt up. You can buckle the corners with your hands when selecting. If you click it, it means there is a problem with the glue.
