The matters needing attention in the production process of hotel furniture, hotel furniture manufacturers introduce to you:
1. Appearance quality
The appearance quality first stipulates that the countertops of furniture cabinets should be leveled, the quality is meticulous, the decoration design is meticulous, and the lines are clear and beautiful. Hotel room furniture generally uses plywood, medium-density plywood, wood board, polyimide film and other types as plates, and wooden, double-layer wood, and three-plywood as cladding materials. The material characteristics of different plates and cladding materials are not the same. Paying attention to the characteristics of the materials and the appropriate operating methods often cause the parts to expand and contract. Beijing and Junxinmei Furniture suggest that the structural characteristics of the reverse surface of the parts and the cladding materials on the reverse surface must be the same or similar. The moisture content of the sheet is generally set at 6-10%, and the materials used are as much as possible. In the production and processing of the production workshop, reduce the time of unwinding and pressing as much as possible, different material characteristics, different moisture content of the cladding material, pay attention to different dispensing thickness, press time and working pressure.
2. Structure compressive strength, common problems in the processing of hotel furniture,
Hotel room furniture is mostly fixed and fixed furniture, generally structured flat type dominated, using wood screws, hardware connectors and adhesives as a tight connection method. When applying materials, pay attention to different material characteristics, such as plywood and medium density fiberboard. The nail holding force is weak. Avoid using it in areas that require frequent theme activities or that must have strong wear resistance, such as door hinge screw parts, and rails. The screw part of the bottom rail is very easy to loosen and cause noise. Attention should be paid to the hardware parts of the bed screen and the glasses frame wall hanging hardware or the use of wood instead of structural reinforcement. At this stage, the wooden structure of the fashionable building is 45 degrees down.
3. Material cost
The same consideration should be given to applying low-cost materials as much as possible under the prescribed conditions, and then using the block surface material. Pay attention to the application of the same small piece of material to comprehensively improve the utilization rate of the board. The total number of hotel room furniture is generally very large, as far as possible, the use of electronic computers to effectively cut materials, block materials and a small piece of material development and utilization, reduce material cost. For different structures, pay attention to the cost of materials.
4. High efficiency manufacturing
Under the condition of the same material cost as hotel furniture, that type of material is convenient for production and processing. That type of processing technology can save the cost of processing technology and improve work efficiency. It is very easy in the process of end milling, router milling, and hand engraving Production and processing drilling is very easy to clean and tidy.
5. Shipping and installation
Hotel restaurant buildings are generally taller, and the lighter furniture is required for transportation. It is very much the back of some conjoined clothes beds and some extended desks. The elevator car can not be transported. The cargo elevator is generally disassembled when the furniture is installed. How to transport it safely needs to be considered from the net weight and structure of the material.
6. Safety factor
General hotel restaurants do not have established requirements for the amount of indoor formaldehyde mineral acid, but there are fire safety regulations for furniture. In some places allowed by hotel restaurants, fireproof plates, heat-insulating paints, and flame-retardant cloths can be applied. High-end hotel restaurants and even the wood required to make furniture have been solved by fire safety. The elements at this level above need to be comprehensively considered in the specific application. The role of hotel furniture provides that the key points of styling design are related to the effective material construction of hotel furniture companies and the distribution of manufacturing processes in the production workshop. Hehua Hotel The furniture proposal is to make the hotel room furniture as much as possible to meet the requirements of the hotel restaurant, and to efficiently produce and control the cost, apply systematic production technology and production equipment, so that the furniture produced is in line with the high-end hotel restaurant. Comfort rules.
